build based on 4035745
This commit is contained in:
autodocs
parent
41053cac7b
commit
7e94966054
@ -11,20 +11,20 @@ m(5) == 26
|
||||
|
||||
m = Chain(Dense(10, 5), Dense(5, 2))
|
||||
x = rand(10)
|
||||
m(x) == m[2](m[1](x))</code></pre><p><code>Chain</code> also supports indexing and slicing, e.g. <code>m[2]</code> or <code>m[1:end-1]</code>. <code>m[1:3](x)</code> will calculate the output of the first three layers.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/basic.jl#L1-L18">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Dense" href="#Flux.Dense"><code>Flux.Dense</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">Dense(in::Integer, out::Integer, σ = identity)</code></pre><p>Creates a traditional <code>Dense</code> layer with parameters <code>W</code> and <code>b</code>.</p><pre><code class="language-none">y = σ.(W * x .+ b)</code></pre><p>The input <code>x</code> must be a vector of length <code>in</code>, or a batch of vectors represented as an <code>in × N</code> matrix. The out <code>y</code> will be a vector or batch of length <code>out</code>.</p><pre><code class="language-julia">julia> d = Dense(5, 2)
|
||||
m(x) == m[2](m[1](x))</code></pre><p><code>Chain</code> also supports indexing and slicing, e.g. <code>m[2]</code> or <code>m[1:end-1]</code>. <code>m[1:3](x)</code> will calculate the output of the first three layers.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/basic.jl#L1-L18">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Dense" href="#Flux.Dense"><code>Flux.Dense</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">Dense(in::Integer, out::Integer, σ = identity)</code></pre><p>Creates a traditional <code>Dense</code> layer with parameters <code>W</code> and <code>b</code>.</p><pre><code class="language-none">y = σ.(W * x .+ b)</code></pre><p>The input <code>x</code> must be a vector of length <code>in</code>, or a batch of vectors represented as an <code>in × N</code> matrix. The out <code>y</code> will be a vector or batch of length <code>out</code>.</p><pre><code class="language-julia">julia> d = Dense(5, 2)
|
||||
Dense(5, 2)
|
||||
|
||||
julia> d(rand(5))
|
||||
Tracked 2-element Array{Float64,1}:
|
||||
0.00257447
|
||||
-0.00449443</code></pre></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/basic.jl#L41-L60">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Conv2D" href="#Flux.Conv2D"><code>Flux.Conv2D</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">Conv2D(size, in=>out)
|
||||
Conv2d(size, in=>out, relu)</code></pre><p>Standard convolutional layer. <code>size</code> should be a tuple like <code>(2, 2)</code>. <code>in</code> and <code>out</code> specify the number of input and output channels respectively.</p><p>Data should be stored in WHCN order. In other words, a 100×100 RGB image would be a <code>100×100×3</code> array, and a batch of 50 would be a <code>100×100×3×50</code> array.</p><p>Takes the keyword arguments <code>pad</code> and <code>stride</code>.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/conv.jl#L1-L12">source</a></section><h2><a class="nav-anchor" id="Recurrent-Layers-1" href="#Recurrent-Layers-1">Recurrent Layers</a></h2><p>Much like the core layers above, but can be used to process sequence data (as well as other kinds of structured data).</p><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.RNN" href="#Flux.RNN"><code>Flux.RNN</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">RNN(in::Integer, out::Integer, σ = tanh)</code></pre><p>The most basic recurrent layer; essentially acts as a <code>Dense</code> layer, but with the output fed back into the input each time step.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/recurrent.jl#L105-L110">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.LSTM" href="#Flux.LSTM"><code>Flux.LSTM</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">LSTM(in::Integer, out::Integer, σ = tanh)</code></pre><p>Long Short Term Memory recurrent layer. Behaves like an RNN but generally exhibits a longer memory span over sequences.</p><p>See <a href="http://colah.github.io/posts/2015-08-Understanding-LSTMs/">this article</a> for a good overview of the internals.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/recurrent.jl#L151-L159">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Recur" href="#Flux.Recur"><code>Flux.Recur</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">Recur(cell)</code></pre><p><code>Recur</code> takes a recurrent cell and makes it stateful, managing the hidden state in the background. <code>cell</code> should be a model of the form:</p><pre><code class="language-none">h, y = cell(h, x...)</code></pre><p>For example, here's a recurrent network that keeps a running total of its inputs.</p><pre><code class="language-julia">accum(h, x) = (h+x, x)
|
||||
-0.00449443</code></pre></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/basic.jl#L41-L60">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Conv2D" href="#Flux.Conv2D"><code>Flux.Conv2D</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">Conv2D(size, in=>out)
|
||||
Conv2d(size, in=>out, relu)</code></pre><p>Standard convolutional layer. <code>size</code> should be a tuple like <code>(2, 2)</code>. <code>in</code> and <code>out</code> specify the number of input and output channels respectively.</p><p>Data should be stored in WHCN order. In other words, a 100×100 RGB image would be a <code>100×100×3</code> array, and a batch of 50 would be a <code>100×100×3×50</code> array.</p><p>Takes the keyword arguments <code>pad</code> and <code>stride</code>.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/conv.jl#L1-L12">source</a></section><h2><a class="nav-anchor" id="Recurrent-Layers-1" href="#Recurrent-Layers-1">Recurrent Layers</a></h2><p>Much like the core layers above, but can be used to process sequence data (as well as other kinds of structured data).</p><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.RNN" href="#Flux.RNN"><code>Flux.RNN</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">RNN(in::Integer, out::Integer, σ = tanh)</code></pre><p>The most basic recurrent layer; essentially acts as a <code>Dense</code> layer, but with the output fed back into the input each time step.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/recurrent.jl#L105-L110">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.LSTM" href="#Flux.LSTM"><code>Flux.LSTM</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">LSTM(in::Integer, out::Integer, σ = tanh)</code></pre><p>Long Short Term Memory recurrent layer. Behaves like an RNN but generally exhibits a longer memory span over sequences.</p><p>See <a href="http://colah.github.io/posts/2015-08-Understanding-LSTMs/">this article</a> for a good overview of the internals.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/recurrent.jl#L151-L159">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Recur" href="#Flux.Recur"><code>Flux.Recur</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">Recur(cell)</code></pre><p><code>Recur</code> takes a recurrent cell and makes it stateful, managing the hidden state in the background. <code>cell</code> should be a model of the form:</p><pre><code class="language-none">h, y = cell(h, x...)</code></pre><p>For example, here's a recurrent network that keeps a running total of its inputs.</p><pre><code class="language-julia">accum(h, x) = (h+x, x)
|
||||
rnn = Flux.Recur(accum, 0)
|
||||
rnn(2) # 2
|
||||
rnn(3) # 3
|
||||
rnn.state # 5
|
||||
rnn.(1:10) # apply to a sequence
|
||||
rnn.state # 60</code></pre></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/recurrent.jl#L7-L26">source</a></section><h2><a class="nav-anchor" id="Activation-Functions-1" href="#Activation-Functions-1">Activation Functions</a></h2><p>Non-linearities that go between layers of your model. Most of these functions are defined in <a href="https://github.com/FluxML/NNlib.jl">NNlib</a> but are available by default in Flux.</p><p>Note that, unless otherwise stated, activation functions operate on scalars. To apply them to an array you can call <code>σ.(xs)</code>, <code>relu.(xs)</code> and so on.</p><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="NNlib.σ" href="#NNlib.σ"><code>NNlib.σ</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">σ(x) = 1 / (1 + exp(-x))</code></pre><p>Classic <a href="https://en.wikipedia.org/wiki/Sigmoid_function">sigmoid</a> activation function.</p><pre><code class="language-none">1 │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣀⣀│
|
||||
rnn.state # 60</code></pre></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/recurrent.jl#L7-L26">source</a></section><h2><a class="nav-anchor" id="Activation-Functions-1" href="#Activation-Functions-1">Activation Functions</a></h2><p>Non-linearities that go between layers of your model. Most of these functions are defined in <a href="https://github.com/FluxML/NNlib.jl">NNlib</a> but are available by default in Flux.</p><p>Note that, unless otherwise stated, activation functions operate on scalars. To apply them to an array you can call <code>σ.(xs)</code>, <code>relu.(xs)</code> and so on.</p><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="NNlib.σ" href="#NNlib.σ"><code>NNlib.σ</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">σ(x) = 1 / (1 + exp(-x))</code></pre><p>Classic <a href="https://en.wikipedia.org/wiki/Sigmoid_function">sigmoid</a> activation function.</p><pre><code class="language-none">1 │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣀⣀│
|
||||
│⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⡠⠔⠒⠉⠉⠀⠀│
|
||||
│⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⣀⠤⠚⠁⠀⠀⠀⠀⠀⠀⠀│
|
||||
│⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⡤⠊⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│
|
||||
@ -99,10 +99,10 @@ rnn.state # 60</code></pre></div><a class="source-link" target="_blank" href="ht
|
||||
│⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│
|
||||
-1 │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│
|
||||
-3 0 3</code></pre></div><a class="source-link" target="_blank" href="https://github.com/FluxML/NNlib.jl/blob/2a20d64412698f8d0d741335dc45c58098b29271/src/activation.jl#L116-L138">source</a></section><h2><a class="nav-anchor" id="Normalisation-and-Regularisation-1" href="#Normalisation-and-Regularisation-1">Normalisation & Regularisation</a></h2><p>These layers don't affect the structure of the network but may improve training times or reduce overfitting.</p><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.testmode!" href="#Flux.testmode!"><code>Flux.testmode!</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">testmode!(m)
|
||||
testmode!(m, false)</code></pre><p>Put layers like <a href="layers.html#Flux.Dropout"><code>Dropout</code></a> and <a href="layers.html#Flux.BatchNorm"><code>BatchNorm</code></a> into testing mode (or back to training mode with <code>false</code>).</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/normalisation.jl#L1-L7">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.BatchNorm" href="#Flux.BatchNorm"><code>Flux.BatchNorm</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">BatchNorm(dims...; λ = identity,
|
||||
testmode!(m, false)</code></pre><p>Put layers like <a href="layers.html#Flux.Dropout"><code>Dropout</code></a> and <a href="layers.html#Flux.BatchNorm"><code>BatchNorm</code></a> into testing mode (or back to training mode with <code>false</code>).</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/normalisation.jl#L1-L7">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.BatchNorm" href="#Flux.BatchNorm"><code>Flux.BatchNorm</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">BatchNorm(dims...; λ = identity,
|
||||
initβ = zeros, initγ = ones, ϵ = 1e-8, momentum = .1)</code></pre><p>Batch Normalization Layer for <a href="layers.html#Flux.Dense"><code>Dense</code></a> layer.</p><p>See <a href="https://arxiv.org/pdf/1502.03167.pdf">Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift</a></p><p>In the example of MNIST, in order to normalize the input of other layer, put the <code>BatchNorm</code> layer before activation function.</p><pre><code class="language-julia">m = Chain(
|
||||
Dense(28^2, 64),
|
||||
BatchNorm(64, λ = relu),
|
||||
Dense(64, 10),
|
||||
BatchNorm(10),
|
||||
softmax)</code></pre></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/normalisation.jl#L70-L91">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Dropout" href="#Flux.Dropout"><code>Flux.Dropout</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">Dropout(p)</code></pre><p>A Dropout layer. For each input, either sets that input to <code>0</code> (with probability <code>p</code>) or scales it by <code>1/(1-p)</code>. This is used as a regularisation, i.e. it reduces overfitting during training.</p><p>Does nothing to the input once in <a href="layers.html#Flux.testmode!"><code>testmode!</code></a>.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/normalisation.jl#L15-L23">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.LayerNorm" href="#Flux.LayerNorm"><code>Flux.LayerNorm</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">LayerNorm(h::Integer)</code></pre><p>A <a href="https://arxiv.org/pdf/1607.06450.pdf">normalisation layer</a> designed to be used with recurrent hidden states of size <code>h</code>. Normalises the mean/stddev of each input before applying a per-neuron gain/bias.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/layers/normalisation.jl#L47-L54">source</a></section><footer><hr/><a class="previous" href="regularisation.html"><span class="direction">Previous</span><span class="title">Regularisation</span></a><a class="next" href="../training/optimisers.html"><span class="direction">Next</span><span class="title">Optimisers</span></a></footer></article></body></html>
|
||||
softmax)</code></pre></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/normalisation.jl#L70-L91">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Dropout" href="#Flux.Dropout"><code>Flux.Dropout</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">Dropout(p)</code></pre><p>A Dropout layer. For each input, either sets that input to <code>0</code> (with probability <code>p</code>) or scales it by <code>1/(1-p)</code>. This is used as a regularisation, i.e. it reduces overfitting during training.</p><p>Does nothing to the input once in <a href="layers.html#Flux.testmode!"><code>testmode!</code></a>.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/normalisation.jl#L15-L23">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.LayerNorm" href="#Flux.LayerNorm"><code>Flux.LayerNorm</code></a> — <span class="docstring-category">Type</span>.</div><div><pre><code class="language-none">LayerNorm(h::Integer)</code></pre><p>A <a href="https://arxiv.org/pdf/1607.06450.pdf">normalisation layer</a> designed to be used with recurrent hidden states of size <code>h</code>. Normalises the mean/stddev of each input before applying a per-neuron gain/bias.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/layers/normalisation.jl#L47-L54">source</a></section><footer><hr/><a class="previous" href="regularisation.html"><span class="direction">Previous</span><span class="title">Regularisation</span></a><a class="next" href="../training/optimisers.html"><span class="direction">Next</span><span class="title">Optimisers</span></a></footer></article></body></html>
|
||||
|
||||
@ -21,7 +21,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Home",
|
||||
"title": "Installation",
|
||||
"category": "section",
|
||||
"text": "Install Julia 0.6.0 or later, if you haven't already.Pkg.add(\"Flux\")\n# Optional but recommended\nPkg.update() # Keep your packages are up to date\nPkg.test(\"Flux\") # Check things installed correctlyStart with the basics. The model zoo is also a good starting point for many common kinds of models."
|
||||
"text": "Install Julia 0.6.0 or later, if you haven\'t already.Pkg.add(\"Flux\")\n# Optional but recommended\nPkg.update() # Keep your packages are up to date\nPkg.test(\"Flux\") # Check things installed correctlyStart with the basics. The model zoo is also a good starting point for many common kinds of models."
|
||||
},
|
||||
|
||||
{
|
||||
@ -45,7 +45,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Basics",
|
||||
"title": "Taking Gradients",
|
||||
"category": "section",
|
||||
"text": "Consider a simple linear regression, which tries to predict an output array y from an input x. (It's a good idea to follow this example in the Julia repl.)W = rand(2, 5)\nb = rand(2)\n\npredict(x) = W*x .+ b\nloss(x, y) = sum((predict(x) .- y).^2)\n\nx, y = rand(5), rand(2) # Dummy data\nloss(x, y) # ~ 3To improve the prediction we can take the gradients of W and b with respect to the loss function and perform gradient descent. We could calculate gradients by hand, but Flux will do it for us if we tell it that W and b are trainable parameters.using Flux.Tracker\n\nW = param(W)\nb = param(b)\n\nl = loss(x, y)\n\nback!(l)loss(x, y) returns the same number, but it's now a tracked value that records gradients as it goes along. Calling back! then calculates the gradient of W and b. We can see what this gradient is, and modify W to train the model.W.grad\n\n# Update the parameter\nW.data .-= 0.1(W.grad)\n\nloss(x, y) # ~ 2.5The loss has decreased a little, meaning that our prediction x is closer to the target y. If we have some data we can already try training the model.All deep learning in Flux, however complex, is a simple generalisation of this example. Of course, models can look very different – they might have millions of parameters or complex control flow, and there are ways to manage this complexity. Let's see what that looks like."
|
||||
"text": "Consider a simple linear regression, which tries to predict an output array y from an input x. (It\'s a good idea to follow this example in the Julia repl.)W = rand(2, 5)\nb = rand(2)\n\npredict(x) = W*x .+ b\nloss(x, y) = sum((predict(x) .- y).^2)\n\nx, y = rand(5), rand(2) # Dummy data\nloss(x, y) # ~ 3To improve the prediction we can take the gradients of W and b with respect to the loss function and perform gradient descent. We could calculate gradients by hand, but Flux will do it for us if we tell it that W and b are trainable parameters.using Flux.Tracker\n\nW = param(W)\nb = param(b)\n\nl = loss(x, y)\n\nback!(l)loss(x, y) returns the same number, but it\'s now a tracked value that records gradients as it goes along. Calling back! then calculates the gradient of W and b. We can see what this gradient is, and modify W to train the model.W.grad\n\n# Update the parameter\nW.data .-= 0.1(W.grad)\n\nloss(x, y) # ~ 2.5The loss has decreased a little, meaning that our prediction x is closer to the target y. If we have some data we can already try training the model.All deep learning in Flux, however complex, is a simple generalisation of this example. Of course, models can look very different – they might have millions of parameters or complex control flow, and there are ways to manage this complexity. Let\'s see what that looks like."
|
||||
},
|
||||
|
||||
{
|
||||
@ -53,7 +53,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Basics",
|
||||
"title": "Building Layers",
|
||||
"category": "section",
|
||||
"text": "It's common to create more complex models than the linear regression above. For example, we might want to have two linear layers with a nonlinearity like sigmoid (σ) in between them. In the above style we could write this as:W1 = param(rand(3, 5))\nb1 = param(rand(3))\nlayer1(x) = W1 * x .+ b1\n\nW2 = param(rand(2, 3))\nb2 = param(rand(2))\nlayer2(x) = W2 * x .+ b2\n\nmodel(x) = layer2(σ.(layer1(x)))\n\nmodel(rand(5)) # => 2-element vectorThis works but is fairly unwieldy, with a lot of repetition – especially as we add more layers. One way to factor this out is to create a function that returns linear layers.function linear(in, out)\n W = param(randn(out, in))\n b = param(randn(out))\n x -> W * x .+ b\nend\n\nlinear1 = linear(5, 3) # we can access linear1.W etc\nlinear2 = linear(3, 2)\n\nmodel(x) = linear2(σ.(linear1(x)))\n\nmodel(x) # => 2-element vectorAnother (equivalent) way is to create a struct that explicitly represents the affine layer.struct Affine\n W\n b\nend\n\nAffine(in::Integer, out::Integer) =\n Affine(param(randn(out, in)), param(randn(out)))\n\n# Overload call, so the object can be used as a function\n(m::Affine)(x) = m.W * x .+ m.b\n\na = Affine(10, 5)\n\na(rand(10)) # => 5-element vectorCongratulations! You just built the Dense layer that comes with Flux. Flux has many interesting layers available, but they're all things you could have built yourself very easily.(There is one small difference with Dense – for convenience it also takes an activation function, like Dense(10, 5, σ).)"
|
||||
"text": "It\'s common to create more complex models than the linear regression above. For example, we might want to have two linear layers with a nonlinearity like sigmoid (σ) in between them. In the above style we could write this as:W1 = param(rand(3, 5))\nb1 = param(rand(3))\nlayer1(x) = W1 * x .+ b1\n\nW2 = param(rand(2, 3))\nb2 = param(rand(2))\nlayer2(x) = W2 * x .+ b2\n\nmodel(x) = layer2(σ.(layer1(x)))\n\nmodel(rand(5)) # => 2-element vectorThis works but is fairly unwieldy, with a lot of repetition – especially as we add more layers. One way to factor this out is to create a function that returns linear layers.function linear(in, out)\n W = param(randn(out, in))\n b = param(randn(out))\n x -> W * x .+ b\nend\n\nlinear1 = linear(5, 3) # we can access linear1.W etc\nlinear2 = linear(3, 2)\n\nmodel(x) = linear2(σ.(linear1(x)))\n\nmodel(x) # => 2-element vectorAnother (equivalent) way is to create a struct that explicitly represents the affine layer.struct Affine\n W\n b\nend\n\nAffine(in::Integer, out::Integer) =\n Affine(param(randn(out, in)), param(randn(out)))\n\n# Overload call, so the object can be used as a function\n(m::Affine)(x) = m.W * x .+ m.b\n\na = Affine(10, 5)\n\na(rand(10)) # => 5-element vectorCongratulations! You just built the Dense layer that comes with Flux. Flux has many interesting layers available, but they\'re all things you could have built yourself very easily.(There is one small difference with Dense – for convenience it also takes an activation function, like Dense(10, 5, σ).)"
|
||||
},
|
||||
|
||||
{
|
||||
@ -61,7 +61,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Basics",
|
||||
"title": "Stacking It Up",
|
||||
"category": "section",
|
||||
"text": "It's pretty common to write models that look something like:layer1 = Dense(10, 5, σ)\n# ...\nmodel(x) = layer3(layer2(layer1(x)))For long chains, it might be a bit more intuitive to have a list of layers, like this:using Flux\n\nlayers = [Dense(10, 5, σ), Dense(5, 2), softmax]\n\nmodel(x) = foldl((x, m) -> m(x), x, layers)\n\nmodel(rand(10)) # => 2-element vectorHandily, this is also provided for in Flux:model2 = Chain(\n Dense(10, 5, σ),\n Dense(5, 2),\n softmax)\n\nmodel2(rand(10)) # => 2-element vectorThis quickly starts to look like a high-level deep learning library; yet you can see how it falls out of simple abstractions, and we lose none of the power of Julia code.A nice property of this approach is that because \"models\" are just functions (possibly with trainable parameters), you can also see this as simple function composition.m = Dense(5, 2) ∘ Dense(10, 5, σ)\n\nm(rand(10))Likewise, Chain will happily work with any Julia function.m = Chain(x -> x^2, x -> x+1)\n\nm(5) # => 26"
|
||||
"text": "It\'s pretty common to write models that look something like:layer1 = Dense(10, 5, σ)\n# ...\nmodel(x) = layer3(layer2(layer1(x)))For long chains, it might be a bit more intuitive to have a list of layers, like this:using Flux\n\nlayers = [Dense(10, 5, σ), Dense(5, 2), softmax]\n\nmodel(x) = foldl((x, m) -> m(x), x, layers)\n\nmodel(rand(10)) # => 2-element vectorHandily, this is also provided for in Flux:model2 = Chain(\n Dense(10, 5, σ),\n Dense(5, 2),\n softmax)\n\nmodel2(rand(10)) # => 2-element vectorThis quickly starts to look like a high-level deep learning library; yet you can see how it falls out of simple abstractions, and we lose none of the power of Julia code.A nice property of this approach is that because \"models\" are just functions (possibly with trainable parameters), you can also see this as simple function composition.m = Dense(5, 2) ∘ Dense(10, 5, σ)\n\nm(rand(10))Likewise, Chain will happily work with any Julia function.m = Chain(x -> x^2, x -> x+1)\n\nm(5) # => 26"
|
||||
},
|
||||
|
||||
{
|
||||
@ -93,7 +93,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Recurrence",
|
||||
"title": "Recurrent Cells",
|
||||
"category": "section",
|
||||
"text": "In the simple feedforward case, our model m is a simple function from various inputs xᵢ to predictions yᵢ. (For example, each x might be an MNIST digit and each y a digit label.) Each prediction is completely independent of any others, and using the same x will always produce the same y.y₁ = f(x₁)\ny₂ = f(x₂)\ny₃ = f(x₃)\n# ...Recurrent networks introduce a hidden state that gets carried over each time we run the model. The model now takes the old h as an input, and produces a new h as output, each time we run it.h = # ... initial state ...\nh, y₁ = f(h, x₁)\nh, y₂ = f(h, x₂)\nh, y₃ = f(h, x₃)\n# ...Information stored in h is preserved for the next prediction, allowing it to function as a kind of memory. This also means that the prediction made for a given x depends on all the inputs previously fed into the model.(This might be important if, for example, each x represents one word of a sentence; the model's interpretation of the word \"bank\" should change if the previous input was \"river\" rather than \"investment\".)Flux's RNN support closely follows this mathematical perspective. The most basic RNN is as close as possible to a standard Dense layer, and the output is also the hidden state.Wxh = randn(5, 10)\nWhh = randn(5, 5)\nb = randn(5)\n\nfunction rnn(h, x)\n h = tanh.(Wxh * x .+ Whh * h .+ b)\n return h, h\nend\n\nx = rand(10) # dummy data\nh = rand(5) # initial hidden state\n\nh, y = rnn(h, x)If you run the last line a few times, you'll notice the output y changing slightly even though the input x is the same.We sometimes refer to functions like rnn above, which explicitly manage state, as recurrent cells. There are various recurrent cells available, which are documented in the layer reference. The hand-written example above can be replaced with:using Flux\n\nrnn2 = Flux.RNNCell(10, 5)\n\nx = rand(10) # dummy data\nh = rand(5) # initial hidden state\n\nh, y = rnn2(h, x)"
|
||||
"text": "In the simple feedforward case, our model m is a simple function from various inputs xᵢ to predictions yᵢ. (For example, each x might be an MNIST digit and each y a digit label.) Each prediction is completely independent of any others, and using the same x will always produce the same y.y₁ = f(x₁)\ny₂ = f(x₂)\ny₃ = f(x₃)\n# ...Recurrent networks introduce a hidden state that gets carried over each time we run the model. The model now takes the old h as an input, and produces a new h as output, each time we run it.h = # ... initial state ...\nh, y₁ = f(h, x₁)\nh, y₂ = f(h, x₂)\nh, y₃ = f(h, x₃)\n# ...Information stored in h is preserved for the next prediction, allowing it to function as a kind of memory. This also means that the prediction made for a given x depends on all the inputs previously fed into the model.(This might be important if, for example, each x represents one word of a sentence; the model\'s interpretation of the word \"bank\" should change if the previous input was \"river\" rather than \"investment\".)Flux\'s RNN support closely follows this mathematical perspective. The most basic RNN is as close as possible to a standard Dense layer, and the output is also the hidden state.Wxh = randn(5, 10)\nWhh = randn(5, 5)\nb = randn(5)\n\nfunction rnn(h, x)\n h = tanh.(Wxh * x .+ Whh * h .+ b)\n return h, h\nend\n\nx = rand(10) # dummy data\nh = rand(5) # initial hidden state\n\nh, y = rnn(h, x)If you run the last line a few times, you\'ll notice the output y changing slightly even though the input x is the same.We sometimes refer to functions like rnn above, which explicitly manage state, as recurrent cells. There are various recurrent cells available, which are documented in the layer reference. The hand-written example above can be replaced with:using Flux\n\nrnn2 = Flux.RNNCell(10, 5)\n\nx = rand(10) # dummy data\nh = rand(5) # initial hidden state\n\nh, y = rnn2(h, x)"
|
||||
},
|
||||
|
||||
{
|
||||
@ -101,7 +101,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Recurrence",
|
||||
"title": "Stateful Models",
|
||||
"category": "section",
|
||||
"text": "For the most part, we don't want to manage hidden states ourselves, but to treat our models as being stateful. Flux provides the Recur wrapper to do this.x = rand(10)\nh = rand(5)\n\nm = Flux.Recur(rnn, h)\n\ny = m(x)The Recur wrapper stores the state between runs in the m.state field.If you use the RNN(10, 5) constructor – as opposed to RNNCell – you'll see that it's simply a wrapped cell.julia> RNN(10, 5)\nRecur(RNNCell(Dense(15, 5)))"
|
||||
"text": "For the most part, we don\'t want to manage hidden states ourselves, but to treat our models as being stateful. Flux provides the Recur wrapper to do this.x = rand(10)\nh = rand(5)\n\nm = Flux.Recur(rnn, h)\n\ny = m(x)The Recur wrapper stores the state between runs in the m.state field.If you use the RNN(10, 5) constructor – as opposed to RNNCell – you\'ll see that it\'s simply a wrapped cell.julia> RNN(10, 5)\nRecur(RNNCell(Dense(15, 5)))"
|
||||
},
|
||||
|
||||
{
|
||||
@ -109,7 +109,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Recurrence",
|
||||
"title": "Sequences",
|
||||
"category": "section",
|
||||
"text": "Often we want to work with sequences of inputs, rather than individual xs.seq = [rand(10) for i = 1:10]With Recur, applying our model to each element of a sequence is trivial:m.(seq) # returns a list of 5-element vectorsThis works even when we've chain recurrent layers into a larger model.m = Chain(LSTM(10, 15), Dense(15, 5))\nm.(seq)"
|
||||
"text": "Often we want to work with sequences of inputs, rather than individual xs.seq = [rand(10) for i = 1:10]With Recur, applying our model to each element of a sequence is trivial:m.(seq) # returns a list of 5-element vectorsThis works even when we\'ve chain recurrent layers into a larger model.m = Chain(LSTM(10, 15), Dense(15, 5))\nm.(seq)"
|
||||
},
|
||||
|
||||
{
|
||||
@ -133,7 +133,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Regularisation",
|
||||
"title": "Regularisation",
|
||||
"category": "section",
|
||||
"text": "Applying regularisation to model parameters is straightforward. We just need to apply an appropriate regulariser, such as norm, to each model parameter and add the result to the overall loss.For example, say we have a simple regression.m = Dense(10, 5)\nloss(x, y) = crossentropy(softmax(m(x)), y)We can regularise this by taking the (L2) norm of the parameters, m.W and m.b.penalty() = norm(m.W) + norm(m.b)\nloss(x, y) = crossentropy(softmax(m(x)), y) + penalty()When working with layers, Flux provides the params function to grab all parameters at once. We can easily penalise everything with sum(norm, params).julia> params(m)\n2-element Array{Any,1}:\n param([0.355408 0.533092; … 0.430459 0.171498])\n param([0.0, 0.0, 0.0, 0.0, 0.0])\n\njulia> sum(norm, params(m))\n26.01749952921026 (tracked)Here's a larger example with a multi-layer perceptron.m = Chain(\n Dense(28^2, 128, relu),\n Dense(128, 32, relu),\n Dense(32, 10), softmax)\n\nloss(x, y) = crossentropy(m(x), y) + sum(norm, params(m))\n\nloss(rand(28^2), rand(10))"
|
||||
"text": "Applying regularisation to model parameters is straightforward. We just need to apply an appropriate regulariser, such as norm, to each model parameter and add the result to the overall loss.For example, say we have a simple regression.m = Dense(10, 5)\nloss(x, y) = crossentropy(softmax(m(x)), y)We can regularise this by taking the (L2) norm of the parameters, m.W and m.b.penalty() = norm(m.W) + norm(m.b)\nloss(x, y) = crossentropy(softmax(m(x)), y) + penalty()When working with layers, Flux provides the params function to grab all parameters at once. We can easily penalise everything with sum(norm, params).julia> params(m)\n2-element Array{Any,1}:\n param([0.355408 0.533092; … 0.430459 0.171498])\n param([0.0, 0.0, 0.0, 0.0, 0.0])\n\njulia> sum(norm, params(m))\n26.01749952921026 (tracked)Here\'s a larger example with a multi-layer perceptron.m = Chain(\n Dense(28^2, 128, relu),\n Dense(128, 32, relu),\n Dense(32, 10), softmax)\n\nloss(x, y) = crossentropy(m(x), y) + sum(norm, params(m))\n\nloss(rand(28^2), rand(10))"
|
||||
},
|
||||
|
||||
{
|
||||
@ -197,7 +197,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Model Reference",
|
||||
"title": "Flux.Recur",
|
||||
"category": "Type",
|
||||
"text": "Recur(cell)\n\nRecur takes a recurrent cell and makes it stateful, managing the hidden state in the background. cell should be a model of the form:\n\nh, y = cell(h, x...)\n\nFor example, here's a recurrent network that keeps a running total of its inputs.\n\naccum(h, x) = (h+x, x)\nrnn = Flux.Recur(accum, 0)\nrnn(2) # 2\nrnn(3) # 3\nrnn.state # 5\nrnn.(1:10) # apply to a sequence\nrnn.state # 60\n\n\n\n"
|
||||
"text": "Recur(cell)\n\nRecur takes a recurrent cell and makes it stateful, managing the hidden state in the background. cell should be a model of the form:\n\nh, y = cell(h, x...)\n\nFor example, here\'s a recurrent network that keeps a running total of its inputs.\n\naccum(h, x) = (h+x, x)\nrnn = Flux.Recur(accum, 0)\nrnn(2) # 2\nrnn(3) # 3\nrnn.state # 5\nrnn.(1:10) # apply to a sequence\nrnn.state # 60\n\n\n\n"
|
||||
},
|
||||
|
||||
{
|
||||
@ -293,7 +293,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Model Reference",
|
||||
"title": "Normalisation & Regularisation",
|
||||
"category": "section",
|
||||
"text": "These layers don't affect the structure of the network but may improve training times or reduce overfitting.Flux.testmode!\nBatchNorm\nDropout\nLayerNorm"
|
||||
"text": "These layers don\'t affect the structure of the network but may improve training times or reduce overfitting.Flux.testmode!\nBatchNorm\nDropout\nLayerNorm"
|
||||
},
|
||||
|
||||
{
|
||||
@ -309,7 +309,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Optimisers",
|
||||
"title": "Optimisers",
|
||||
"category": "section",
|
||||
"text": "Consider a simple linear regression. We create some dummy data, calculate a loss, and backpropagate to calculate gradients for the parameters W and b.W = param(rand(2, 5))\nb = param(rand(2))\n\npredict(x) = W*x .+ b\nloss(x, y) = sum((predict(x) .- y).^2)\n\nx, y = rand(5), rand(2) # Dummy data\nl = loss(x, y) # ~ 3\nback!(l)We want to update each parameter, using the gradient, in order to improve (reduce) the loss. Here's one way to do that:function update()\n η = 0.1 # Learning Rate\n for p in (W, b)\n p.data .-= η .* p.grad # Apply the update\n p.grad .= 0 # Clear the gradient\n end\nendIf we call update, the parameters W and b will change and our loss should go down.There are two pieces here: one is that we need a list of trainable parameters for the model ([W, b] in this case), and the other is the update step. In this case the update is simply gradient descent (x .-= η .* Δ), but we might choose to do something more advanced, like adding momentum.In this case, getting the variables is trivial, but you can imagine it'd be more of a pain with some complex stack of layers.m = Chain(\n Dense(10, 5, σ),\n Dense(5, 2), softmax)Instead of having to write [m[1].W, m[1].b, ...], Flux provides a params function params(m) that returns a list of all parameters in the model for you.For the update step, there's nothing whatsoever wrong with writing the loop above – it'll work just fine – but Flux provides various optimisers that make it more convenient.opt = SGD([W, b], 0.1) # Gradient descent with learning rate 0.1\n\nopt() # Carry out the update, modifying `W` and `b`.An optimiser takes a parameter list and returns a function that does the same thing as update above. We can pass either opt or update to our training loop, which will then run the optimiser after every mini-batch of data."
|
||||
"text": "Consider a simple linear regression. We create some dummy data, calculate a loss, and backpropagate to calculate gradients for the parameters W and b.W = param(rand(2, 5))\nb = param(rand(2))\n\npredict(x) = W*x .+ b\nloss(x, y) = sum((predict(x) .- y).^2)\n\nx, y = rand(5), rand(2) # Dummy data\nl = loss(x, y) # ~ 3\nback!(l)We want to update each parameter, using the gradient, in order to improve (reduce) the loss. Here\'s one way to do that:function update()\n η = 0.1 # Learning Rate\n for p in (W, b)\n p.data .-= η .* p.grad # Apply the update\n p.grad .= 0 # Clear the gradient\n end\nendIf we call update, the parameters W and b will change and our loss should go down.There are two pieces here: one is that we need a list of trainable parameters for the model ([W, b] in this case), and the other is the update step. In this case the update is simply gradient descent (x .-= η .* Δ), but we might choose to do something more advanced, like adding momentum.In this case, getting the variables is trivial, but you can imagine it\'d be more of a pain with some complex stack of layers.m = Chain(\n Dense(10, 5, σ),\n Dense(5, 2), softmax)Instead of having to write [m[1].W, m[1].b, ...], Flux provides a params function params(m) that returns a list of all parameters in the model for you.For the update step, there\'s nothing whatsoever wrong with writing the loop above – it\'ll work just fine – but Flux provides various optimisers that make it more convenient.opt = SGD([W, b], 0.1) # Gradient descent with learning rate 0.1\n\nopt() # Carry out the update, modifying `W` and `b`.An optimiser takes a parameter list and returns a function that does the same thing as update above. We can pass either opt or update to our training loop, which will then run the optimiser after every mini-batch of data."
|
||||
},
|
||||
|
||||
{
|
||||
@ -381,7 +381,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Training",
|
||||
"title": "Datasets",
|
||||
"category": "section",
|
||||
"text": "The data argument provides a collection of data to train with (usually a set of inputs x and target outputs y). For example, here's a dummy data set with only one data point:x = rand(784)\ny = rand(10)\ndata = [(x, y)]Flux.train! will call loss(x, y), calculate gradients, update the weights and then move on to the next data point if there is one. We can train the model on the same data three times:data = [(x, y), (x, y), (x, y)]\n# Or equivalently\ndata = Iterators.repeated((x, y), 3)It's common to load the xs and ys separately. In this case you can use zip:xs = [rand(784), rand(784), rand(784)]\nys = [rand( 10), rand( 10), rand( 10)]\ndata = zip(xs, ys)Note that, by default, train! only loops over the data once (a single \"epoch\"). A convenient way to run multiple epochs from the REPL is provided by @epochs.julia> using Flux: @epochs\n\njulia> @epochs 2 println(\"hello\")\nINFO: Epoch 1\nhello\nINFO: Epoch 2\nhello\n\njulia> @epochs 2 Flux.train!(...)\n# Train for two epochs"
|
||||
"text": "The data argument provides a collection of data to train with (usually a set of inputs x and target outputs y). For example, here\'s a dummy data set with only one data point:x = rand(784)\ny = rand(10)\ndata = [(x, y)]Flux.train! will call loss(x, y), calculate gradients, update the weights and then move on to the next data point if there is one. We can train the model on the same data three times:data = [(x, y), (x, y), (x, y)]\n# Or equivalently\ndata = Iterators.repeated((x, y), 3)It\'s common to load the xs and ys separately. In this case you can use zip:xs = [rand(784), rand(784), rand(784)]\nys = [rand( 10), rand( 10), rand( 10)]\ndata = zip(xs, ys)Note that, by default, train! only loops over the data once (a single \"epoch\"). A convenient way to run multiple epochs from the REPL is provided by @epochs.julia> using Flux: @epochs\n\njulia> @epochs 2 println(\"hello\")\nINFO: Epoch 1\nhello\nINFO: Epoch 2\nhello\n\njulia> @epochs 2 Flux.train!(...)\n# Train for two epochs"
|
||||
},
|
||||
|
||||
{
|
||||
@ -389,7 +389,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Training",
|
||||
"title": "Callbacks",
|
||||
"category": "section",
|
||||
"text": "train! takes an additional argument, cb, that's used for callbacks so that you can observe the training process. For example:train!(objective, data, opt, cb = () -> println(\"training\"))Callbacks are called for every batch of training data. You can slow this down using Flux.throttle(f, timeout) which prevents f from being called more than once every timeout seconds.A more typical callback might look like this:test_x, test_y = # ... create single batch of test data ...\nevalcb() = @show(loss(test_x, test_y))\n\nFlux.train!(objective, data, opt,\n cb = throttle(evalcb, 5))"
|
||||
"text": "train! takes an additional argument, cb, that\'s used for callbacks so that you can observe the training process. For example:train!(objective, data, opt, cb = () -> println(\"training\"))Callbacks are called for every batch of training data. You can slow this down using Flux.throttle(f, timeout) which prevents f from being called more than once every timeout seconds.A more typical callback might look like this:test_x, test_y = # ... create single batch of test data ...\nevalcb() = @show(loss(test_x, test_y))\n\nFlux.train!(objective, data, opt,\n cb = throttle(evalcb, 5))"
|
||||
},
|
||||
|
||||
{
|
||||
@ -405,7 +405,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "One-Hot Encoding",
|
||||
"title": "One-Hot Encoding",
|
||||
"category": "section",
|
||||
"text": "It's common to encode categorical variables (like true, false or cat, dog) in \"one-of-k\" or \"one-hot\" form. Flux provides the onehot function to make this easy.julia> using Flux: onehot\n\njulia> onehot(:b, [:a, :b, :c])\n3-element Flux.OneHotVector:\n false\n true\n false\n\njulia> onehot(:c, [:a, :b, :c])\n3-element Flux.OneHotVector:\n false\n false\n trueThe inverse is argmax (which can take a general probability distribution, as well as just booleans).julia> argmax(ans, [:a, :b, :c])\n:c\n\njulia> argmax([true, false, false], [:a, :b, :c])\n:a\n\njulia> argmax([0.3, 0.2, 0.5], [:a, :b, :c])\n:c"
|
||||
"text": "It\'s common to encode categorical variables (like true, false or cat, dog) in \"one-of-k\" or \"one-hot\" form. Flux provides the onehot function to make this easy.julia> using Flux: onehot\n\njulia> onehot(:b, [:a, :b, :c])\n3-element Flux.OneHotVector:\n false\n true\n false\n\njulia> onehot(:c, [:a, :b, :c])\n3-element Flux.OneHotVector:\n false\n false\n trueThe inverse is argmax (which can take a general probability distribution, as well as just booleans).julia> argmax(ans, [:a, :b, :c])\n:c\n\njulia> argmax([true, false, false], [:a, :b, :c])\n:a\n\njulia> argmax([0.3, 0.2, 0.5], [:a, :b, :c])\n:c"
|
||||
},
|
||||
|
||||
{
|
||||
@ -429,7 +429,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "GPU Support",
|
||||
"title": "GPU Support",
|
||||
"category": "section",
|
||||
"text": "Support for array operations on other hardware backends, like GPUs, is provided by external packages like CuArrays and CLArrays. Flux doesn't care what array type you use, so we can just plug these in without any other changes.For example, we can use CuArrays (with the cu converter) to run our basic example on an NVIDIA GPU.using CuArrays\n\nW = cu(rand(2, 5)) # a 2×5 CuArray\nb = cu(rand(2))\n\npredict(x) = W*x .+ b\nloss(x, y) = sum((predict(x) .- y).^2)\n\nx, y = cu(rand(5)), cu(rand(2)) # Dummy data\nloss(x, y) # ~ 3Note that we convert both the parameters (W, b) and the data set (x, y) to cuda arrays. Taking derivatives and training works exactly as before.If you define a structured model, like a Dense layer or Chain, you just need to convert the internal parameters. Flux provides mapleaves, which allows you to alter all parameters of a model at once.d = Dense(10, 5, σ)\nd = mapleaves(cu, d)\nd.W # Tracked CuArray\nd(cu(rand(10))) # CuArray output\n\nm = Chain(Dense(10, 5, σ), Dense(5, 2), softmax)\nm = mapleaves(cu, m)\nd(cu(rand(10)))The mnist example contains the code needed to run the model on the GPU; just uncomment the lines after using CuArrays."
|
||||
"text": "Support for array operations on other hardware backends, like GPUs, is provided by external packages like CuArrays and CLArrays. Flux doesn\'t care what array type you use, so we can just plug these in without any other changes.For example, we can use CuArrays (with the cu converter) to run our basic example on an NVIDIA GPU.using CuArrays\n\nW = cu(rand(2, 5)) # a 2×5 CuArray\nb = cu(rand(2))\n\npredict(x) = W*x .+ b\nloss(x, y) = sum((predict(x) .- y).^2)\n\nx, y = cu(rand(5)), cu(rand(2)) # Dummy data\nloss(x, y) # ~ 3Note that we convert both the parameters (W, b) and the data set (x, y) to cuda arrays. Taking derivatives and training works exactly as before.If you define a structured model, like a Dense layer or Chain, you just need to convert the internal parameters. Flux provides mapleaves, which allows you to alter all parameters of a model at once.d = Dense(10, 5, σ)\nd = mapleaves(cu, d)\nd.W # Tracked CuArray\nd(cu(rand(10))) # CuArray output\n\nm = Chain(Dense(10, 5, σ), Dense(5, 2), softmax)\nm = mapleaves(cu, m)\nd(cu(rand(10)))The mnist example contains the code needed to run the model on the GPU; just uncomment the lines after using CuArrays."
|
||||
},
|
||||
|
||||
{
|
||||
@ -445,7 +445,7 @@ var documenterSearchIndex = {"docs": [
|
||||
"page": "Community",
|
||||
"title": "Community",
|
||||
"category": "section",
|
||||
"text": "All Flux users are welcome to join our community on the Julia forum, the slack (channel #machine-learning), or Flux's Gitter. If you have questions or issues we'll try to help you out.If you're interested in hacking on Flux, the source code is open and easy to understand – it's all just the same Julia code you work with normally. You might be interested in our intro issues to get started."
|
||||
"text": "All Flux users are welcome to join our community on the Julia forum, the slack (channel #machine-learning), or Flux\'s Gitter. If you have questions or issues we\'ll try to help you out.If you\'re interested in hacking on Flux, the source code is open and easy to understand – it\'s all just the same Julia code you work with normally. You might be interested in our intro issues to get started."
|
||||
},
|
||||
|
||||
]}
|
||||
|
||||
@ -24,4 +24,4 @@ end</code></pre><p>If we call <code>update</code>, the parameters <code>W</code>
|
||||
Dense(10, 5, σ),
|
||||
Dense(5, 2), softmax)</code></pre><p>Instead of having to write <code>[m[1].W, m[1].b, ...]</code>, Flux provides a params function <code>params(m)</code> that returns a list of all parameters in the model for you.</p><p>For the update step, there's nothing whatsoever wrong with writing the loop above – it'll work just fine – but Flux provides various <em>optimisers</em> that make it more convenient.</p><pre><code class="language-julia">opt = SGD([W, b], 0.1) # Gradient descent with learning rate 0.1
|
||||
|
||||
opt() # Carry out the update, modifying `W` and `b`.</code></pre><p>An optimiser takes a parameter list and returns a function that does the same thing as <code>update</code> above. We can pass either <code>opt</code> or <code>update</code> to our <a href="training.html">training loop</a>, which will then run the optimiser after every mini-batch of data.</p><h2><a class="nav-anchor" id="Optimiser-Reference-1" href="#Optimiser-Reference-1">Optimiser Reference</a></h2><p>All optimisers return a function that, when called, will update the parameters passed to it.</p><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Optimise.SGD" href="#Flux.Optimise.SGD"><code>Flux.Optimise.SGD</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">SGD(params, η = 0.1; decay = 0)</code></pre><p>Classic gradient descent optimiser with learning rate <code>η</code>. For each parameter <code>p</code> and its gradient <code>δp</code>, this runs <code>p -= η*δp</code>.</p><p>Supports inverse decaying learning rate if the <code>decay</code> argument is provided.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/optimise/interface.jl#L14-L21">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Optimise.Momentum" href="#Flux.Optimise.Momentum"><code>Flux.Optimise.Momentum</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">Momentum(params, η = 0.01; ρ = 0.9, decay = 0)</code></pre><p>SGD with learning rate <code>η</code>, momentum <code>ρ</code> and optional learning rate inverse decay.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/optimise/interface.jl#L25-L29">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Optimise.Nesterov" href="#Flux.Optimise.Nesterov"><code>Flux.Optimise.Nesterov</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">Nesterov(params, η = 0.01; ρ = 0.9, decay = 0)</code></pre><p>SGD with learning rate <code>η</code>, Nesterov momentum <code>ρ</code> and optional learning rate inverse decay.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/optimise/interface.jl#L33-L37">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Optimise.ADAM" href="#Flux.Optimise.ADAM"><code>Flux.Optimise.ADAM</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">ADAM(params, η = 0.001; β1 = 0.9, β2 = 0.999, ϵ = 1e-08, decay = 0)</code></pre><p><a href="https://arxiv.org/abs/1412.6980v8">ADAM</a> optimiser.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/d22270050ccdddadd803054e671b4e4983b74c4a/src/optimise/interface.jl#L51-L55">source</a></section><footer><hr/><a class="previous" href="../models/layers.html"><span class="direction">Previous</span><span class="title">Model Reference</span></a><a class="next" href="training.html"><span class="direction">Next</span><span class="title">Training</span></a></footer></article></body></html>
|
||||
opt() # Carry out the update, modifying `W` and `b`.</code></pre><p>An optimiser takes a parameter list and returns a function that does the same thing as <code>update</code> above. We can pass either <code>opt</code> or <code>update</code> to our <a href="training.html">training loop</a>, which will then run the optimiser after every mini-batch of data.</p><h2><a class="nav-anchor" id="Optimiser-Reference-1" href="#Optimiser-Reference-1">Optimiser Reference</a></h2><p>All optimisers return a function that, when called, will update the parameters passed to it.</p><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Optimise.SGD" href="#Flux.Optimise.SGD"><code>Flux.Optimise.SGD</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">SGD(params, η = 0.1; decay = 0)</code></pre><p>Classic gradient descent optimiser with learning rate <code>η</code>. For each parameter <code>p</code> and its gradient <code>δp</code>, this runs <code>p -= η*δp</code>.</p><p>Supports inverse decaying learning rate if the <code>decay</code> argument is provided.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/optimise/interface.jl#L14-L21">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Optimise.Momentum" href="#Flux.Optimise.Momentum"><code>Flux.Optimise.Momentum</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">Momentum(params, η = 0.01; ρ = 0.9, decay = 0)</code></pre><p>SGD with learning rate <code>η</code>, momentum <code>ρ</code> and optional learning rate inverse decay.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/optimise/interface.jl#L25-L29">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Optimise.Nesterov" href="#Flux.Optimise.Nesterov"><code>Flux.Optimise.Nesterov</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">Nesterov(params, η = 0.01; ρ = 0.9, decay = 0)</code></pre><p>SGD with learning rate <code>η</code>, Nesterov momentum <code>ρ</code> and optional learning rate inverse decay.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/optimise/interface.jl#L33-L37">source</a></section><section class="docstring"><div class="docstring-header"><a class="docstring-binding" id="Flux.Optimise.ADAM" href="#Flux.Optimise.ADAM"><code>Flux.Optimise.ADAM</code></a> — <span class="docstring-category">Function</span>.</div><div><pre><code class="language-none">ADAM(params, η = 0.001; β1 = 0.9, β2 = 0.999, ϵ = 1e-08, decay = 0)</code></pre><p><a href="https://arxiv.org/abs/1412.6980v8">ADAM</a> optimiser.</p></div><a class="source-link" target="_blank" href="https://github.com/FluxML/Flux.jl/blob/4035745f6e58b2ce7bebffd43673efa0486c630f/src/optimise/interface.jl#L51-L55">source</a></section><footer><hr/><a class="previous" href="../models/layers.html"><span class="direction">Previous</span><span class="title">Model Reference</span></a><a class="next" href="training.html"><span class="direction">Next</span><span class="title">Training</span></a></footer></article></body></html>
|
||||
|
||||
Loading…
Reference in New Issue
Block a user