Bugs removed and add new applications

.config/bumblebee-status/config

@@ -0,0 +1,14 @@
+[core]
+#modules = mpd,sensors,memory,battery,nic,datetime
+modules = mpd,sensors,memory,battery,datetime
+autohide = mpd
+theme = rose-pine
+
+[module-parameters]
+#datetime.format = "%a %b %d %R %Z"
+datetime.format = %a %b %d %R
+memory.format = {percent:05.02f}%
+mpd.format = {file} {name} {artist}
+#nic.exclude = lo,virbr,docker,vboxnet,veth,br,.*:avahi,enp2s0
+#nic.include = wlp3s0
+#nic.format = {intf} {state} {strength}

.config/mpd/mpd.conf

@@ -0,0 +1,423 @@
+# An example configuration file for MPD.
+# Read the user manual for documentation: http://www.musicpd.org/doc/user/
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
+#
+music_directory		"~/Music"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+playlist_directory "~/.config/mpd/playlists"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file "~/.config/mpd/mpd.db"
+
+# These settings are the locations for the daemon log files for the daemon.
+#
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog.
+#
+# If you use systemd, do not configure a log_file.  With systemd, MPD
+# defaults to the systemd journal, which is fine.
+#
+#log_file			"~/.config/mpd/log"
+
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+# If you use systemd, do not configure a pid_file.
+#
+pid_file "~/.config/mpd/mpd.pid"
+
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+state_file "~/.local/state/mpd/state"
+#
+# The location of the sticker database.  This is a database which
+# manages dynamic information attached to songs.
+#
+sticker_file			"~/.config/mpd/sticker.sql"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+user "eduardo"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
+#
+#group				"nogroup"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other than the default, any.
+# This setting can deny access to control of the daemon. Not effective if
+# systemd socket activation is in use.
+#
+# For network
+#bind_to_address		"any"
+#
+# And for Unix Socket
+bind_to_address		"~/.config/mpd/socket"
+#
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
+#
+#port				"6600"
+#
+# Suppress all messages below the given threshold.  Use "verbose" for
+# troubleshooting. Available setting arguments are "notice", "info", "verbose",
+# "warning" and "error".
+#
+#log_level			"notice"
+#
+# Setting "restore_paused" to "yes" puts MPD into pause mode instead
+# of starting playback after startup.
+#
+#restore_paused "no"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists	"no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. The complete list of possible values can be
+# found in the user manual.
+#metadata_to_use	"artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This example just enables the "comment" tag without disabling all
+# the other supported tags:
+#metadata_to_use "+comment"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+auto_update	"yes"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself.  There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
+
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks	"yes"
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks		"yes"
+#
+###############################################################################
+
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled		"yes"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network. %h will be replaced with the hostname.
+#
+#zeroconf_name			"Music Player @ %h"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# setting can be specified multiple times for different password profiles.
+#
+#password                        "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions             "read,add,control,admin"
+#
+###############################################################################
+
+
+# Database #######################################################################
+#
+# An example of a database section instead of the old 'db_file' setting.
+# It enables mounting other storages into the music directory.
+#
+#database {
+#       plugin "simple"
+#       path "~/.local/share/mpd/db"
+#       cache_directory "~/.local/share/mpd/cache"
+#}
+#
+# An example of database config for a satellite setup
+#
+#music_directory "nfs://fileserver.local/srv/mp3"
+#database {
+#       plugin "proxy"
+#       host "other.mpd.host"
+#       port "6600"
+#}
+
+# Input #######################################################################
+#
+input {
+        plugin "curl"
+#       proxy "proxy.isp.com:8080"
+#       proxy_user "user"
+#       proxy_password "password"
+}
+
+#
+###############################################################################
+
+# Audio Output ################################################################
+#
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# An example of an ALSA output:
+#
+#audio_output {
+#	type		"alsa"
+#	name		"My ALSA Device"
+##	device		"hw:0,0"	# optional
+##	mixer_type      "hardware"	# optional
+##	mixer_device	"default"	# optional
+##	mixer_control	"PCM"		# optional
+##	mixer_index	"0"		# optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+#	type		"oss"
+#	name		"My OSS Device"
+##	device		"/dev/dsp"	# optional
+##	mixer_type      "hardware"	# optional
+##	mixer_device	"/dev/mixer"	# optional
+##	mixer_control	"PCM"		# optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+#	type		"shout"
+#	encoder		"vorbis"		# optional
+#	name		"My Shout Stream"
+#	host		"localhost"
+#	port		"8000"
+#	mount		"/mpd.ogg"
+#	password	"hackme"
+#	quality		"5.0"
+#	bitrate		"128"
+#	format		"44100:16:1"
+##	protocol	"icecast2"		# optional
+##	user		"source"		# optional
+##	description	"My Stream Description"	# optional
+##	url		"http://example.com"	# optional
+##	genre		"jazz"			# optional
+##	public		"no"			# optional
+##	timeout		"2"			# optional
+##	mixer_type      "software"		# optional
+#}
+#
+# An example of a recorder output:
+#
+#audio_output {
+#	type		"recorder"
+#	name		"My recorder"
+#	encoder		"vorbis"		# optional, vorbis or lame
+#	path		"/var/lib/mpd/recorder/mpd.ogg"
+##	quality		"5.0"			# do not define if bitrate is defined
+#	bitrate		"128"			# do not define if quality is defined
+#	format		"44100:16:1"
+#}
+#
+# An example of a httpd output (built-in HTTP streaming server):
+#
+#audio_output {
+#	type		"httpd"
+#	name		"My HTTP Stream"
+#	encoder		"vorbis"		# optional, vorbis or lame
+#	port		"8000"
+#	bind_to_address	"0.0.0.0"		# optional, IPv4 or IPv6
+##	quality		"5.0"			# do not define if bitrate is defined
+#	bitrate		"128"			# do not define if quality is defined
+#	format		"44100:16:1"
+#	max_clients	"0"			# optional 0=no limit
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+#audio_output {
+#	type		"pulse"
+#	name		"My Pulse Output"
+##	server		"remote_server"		# optional
+##	sink		"remote_server_sink"	# optional
+##	media_role	"media_role"		#optional
+#}
+#
+# An example of a winmm output (Windows multimedia API).
+#
+#audio_output {
+#	type		"winmm"
+#	name		"My WinMM output"
+##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#		or
+##	device		"0"		# optional
+##	mixer_type	"hardware"	# optional
+#}
+#
+# An example of a wasapi output (Windows multimedia API).
+#
+#audio_output {
+#	type		"wasapi"
+#	name		"My WASAPI output"
+##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#		or
+##	device		"0"		# optional
+##	mixer_type	"hardware"	# optional
+## Exclusive mode blocks all other audio source, and get best audio quality without resampling.
+##	exclusive	"no"		# optional
+## Enumerate all devices in log.
+##	enumerate	"no"		# optional
+#}
+#
+# An example of an openal output.
+#
+#audio_output {
+#	type		"openal"
+#	name		"My OpenAL output"
+##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#}
+#
+# An example of an sndio output.
+#
+#audio_output {
+#	type		"sndio"
+#	name		"sndio output"
+#	mixer_type	"hardware"
+#}
+#
+# An example of an OS X output:
+#
+#audio_output {
+#	type		"osx"
+#	name		"My OS X Device"
+##	device		"Built-in Output"	# optional
+##	channel_map      "-1,-1,0,1"	# optional
+#}
+#
+## Example "pipe" output:
+#
+#audio_output {
+#	type		"pipe"
+#	name		"my pipe"
+#	command		"aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+#	command		"AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+#	command		"nc example.org 8765"
+#	format		"44100:16:2"
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+#	type		"null"
+#	name		"My Null Output"
+#	mixer_type      "none"			# optional
+#}
+#
+audio_output {
+        type            "pipewire"
+        name            "PipeWire Sound Server"
+}
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album", "track" or "auto". "auto" is a special mode that
+# chooses between "track" and "album" depending on the current state of
+# random playback. If random playback is enabled then "track" mode is used.
+# See <https://wiki.hydrogenaud.io/index.php?title=Replaygain> for
+# more details about ReplayGain.
+# This setting is off by default.
+#
+#replaygain			"album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp		"0"
+#
+# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
+# By default this setting is disabled.
+#
+#replaygain_missing_preamp	"0"
+#
+# This setting enables or disables ReplayGain limiting.
+# MPD calculates actual amplification based on the ReplayGain tags
+# and replaygain_preamp / replaygain_missing_preamp setting.
+# If replaygain_limit is enabled MPD will never amplify audio signal
+# above its original level. If replaygain_limit is disabled such amplification
+# might occur. By default this setting is enabled.
+#
+#replaygain_limit		"yes"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
+#
+#volume_normalization		"no"
+#
+###############################################################################
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
+#
+#filesystem_charset		"UTF-8"
+#
+###############################################################################

.config/mpd/mpd.pid

@@ -0,0 +1 @@
+13160

.config/nvim/lua/user/core/options.lua

@@ -60,6 +60,7 @@ vim.diagnostic.config({
 
 -- Show line diagnostics automatically in hover window
 vim.o.updatetime = 250
+vim.o.sessionoptions = "blank,buffers,curdir,folds,help,tabpages,winsize,winpos,terminal,localoptions"
 vim.cmd([[autocmd CursorHold,CursorHoldI * lua vim.diagnostic.open_float(nil, {focus=false})]])
 
 local f = io.popen("uname -s")

.config/nvim/lua/user/plugins/01_treesitter.lua

@@ -22,16 +22,18 @@ return {
             },
             -- ensure these language parsers are installed
             ensure_installed = {
-                "yaml",
+                "bash",
+                "c",
+                "gitignore",
+                "lua",
+                "query",
                 "markdown",
                 "markdown_inline",
-                "bash",
-                "lua",
                 "vim",
-                "gitignore",
-                "query",
                 "vimdoc",
-                "c",
+                "yaml",
+                "rust",
+                "zig",
             },
             incremental_selection = {
                 enable = true,

.config/nvim/lua/user/plugins/04_linting.lua

@@ -5,7 +5,7 @@ return {
         local lint = require("lint")
 
         lint.linters_by_ft = {
-            python = { "pylint" },
+            --python = { "pylint" },
         }
 
         local lint_augroup = vim.api.nvim_create_augroup("lint", { clear = true })

.config/nvim/lua/user/plugins/lsp/00_mason.lua

@@ -28,10 +28,10 @@ return {
             -- list of servers for mason to install
             ensure_installed = {
                 "bashls",
-                "clangd",
+                --"clangd",
                 "lua_ls",
                 "ltex",
-                "pyright",
+                "pylsp",
                 "zls",
             },
         })
@@ -42,8 +42,7 @@ return {
                 "stylua", -- lua formatter
                 "isort", -- python formatter
                 "black", -- python formatter
-                "pylint",
+                --"pylint",
-                "eslint_d",
             },
         })
     end,

.config/nvim/lua/user/plugins/lsp/01_lspconfig.lua

@@ -255,9 +255,9 @@ return {
                                 autopep8 = { enabled = false },
                                 yapf = { enabled = false },
                                 -- linter options
-                                pylint = { enabled = false, executable = "pylint" },
+                                pylint = { enabled = true, executable = "pylint" },
                                 pyflakes = { enabled = false },
-                                pycodestyle = { enabled = true, maxLineLength = 110 },
+                                pycodestyle = { enabled = false, maxLineLength = 110 },
                                 -- type checker
                                 pylsp_mypy = { enabled = true },
                                 -- auto-completion options
@@ -276,7 +276,7 @@ return {
                 lspconfig["zls"].setup({
                     capabilities = capabilities,
                     settings = {
-                        cmd = { "~/.local/bin/zls" },
+                        cmd = { "~/.local/share/nvim/mason/bin/zls" },
                     },
                 })
             end,

.config/sway/config

@@ -26,8 +26,8 @@ set $down j
 set $up k
 set $right l
 
-# Waybar position
+# Bar position
-set $waybar_position top
+set $bar_position top
 
 # Your preferred terminal emulator
 set $term alacritty -e tmux

.config/sway/config.d/96-bar-config.conf

@@ -0,0 +1,9 @@
+#
+# Status Bar:
+#
+bar {
+    font pango: Terminess Nerd Font 12
+    id default
+    status_command ~/.local/share/bumblebee-status/bumblebee-status
+    position $bar_position
+}

.config/sway/config.d/96-waybar-config.conf

@@ -1,8 +0,0 @@
-#
-# Status Bar:
-#
-bar {
-    id default
-    swaybar_command waybar
-    position $waybar_position
-}

.config/sway/config.d/99-autostart.conf

@@ -2,7 +2,9 @@
 input * xkb_numlock enable
 
 exec {
-    '[ -x "$(command -v blueman-applet)" ] && blueman-applet'
+    pipewire
+    mpd '~.config/mpd/mpd.conf'
+    #'[ -x "$(command -v blueman-applet)" ] && blueman-applet'
     #'[ -x "$(command -v ~/.config/waybar/scripts/battery-notification.sh)" ] && ~/.config/waybar/scripts/battery-notification.sh'
     # Default wallpaper
     swaybg -o $int_monitor -i $background
@@ -10,7 +12,7 @@ exec {
 }
 
 exec_always {
-    emacs --daemon
+    #emacs --daemon
     gsettings set org.gnome.desktop.interface gtk-theme 'Adwaita-dark'
     gsettings set org.gnome.desktop.interface icon-theme 'Adwaita'
     gsettings set org.gnome.desktop.interface cursor-theme 'Adwaita'

.config/yazi/flavors/tokyo-night.yazi/flavor.toml

@@ -0,0 +1,185 @@
+# vim:fileencoding=utf-8:foldmethod=marker
+
+# : Manager {{{
+
+[manager]
+cwd = { fg = "#7aa2f7" }  # Blue
+
+# Hovered
+hovered         = { reversed = true }
+preview_hovered = { underline = true }
+
+# Find
+find_keyword  = { fg = "#f7768e", bold = true, italic = true, underline = true }  # Red
+find_position = { fg = "#bb9af7", bg = "reset", bold = true, italic = true }  # Magenta
+
+# Marker
+marker_copied   = { fg = "#9ece6a", bg = "#9ece6a" }  # Green
+marker_cut      = { fg = "#e0af68", bg = "#f7768e" }  # Red
+marker_marked   = { fg = "#7aa2f7", bg = "#7dcfff" }  # Cyan
+marker_selected = { fg = "#e0af68", bg = "#e0af68" }  # Yellow
+
+# Tab
+tab_active = { bg = "#282C34", fg = "#7aa2f7" }  # Darkened background, Blue text
+tab_inactive = {}
+tab_width    = 1
+
+# Count
+count_copied   = { fg = "#414868", bg = "#9ece6a" }  # Darkened black on Green
+count_cut      = { fg = "#414868", bg = "#e0af68" }  # Darkened black on Yellow
+count_selected = { fg = "#414868", bg = "#7aa2f7" }  # Darkened black on Blue
+
+# Border
+border_symbol = "│"
+border_style  = { fg = "#414868" }  # Darkened black
+
+# : }}}
+
+
+# : Mode {{{
+
+[mode]
+
+normal_main = { fg = "#414868", bg = "#7aa2f7", bold = true }  # Darkened black on Blue
+normal_alt  = { fg = "#7aa2f7", bg = "#414868" }  # Blue on Darkened black
+
+# Select mode
+select_main = { fg = "#414868", bg = "#9ece6a", bold = true }  # Darkened black on Green
+select_alt  = { fg = "#7aa2f7", bg = "#414868" }  # Blue on Darkened black
+
+# Unset mode
+unset_main = { fg = "#414868", bg = "#bb9af7", bold = true }  # Darkened black on Magenta
+unset_alt  = { fg = "#7aa2f7", bg = "#414868" }  # Blue on Darkened black
+
+# : }}}
+
+
+# : Status bar {{{
+
+[status]
+separator_open  = ""
+separator_close = ""
+separator_style = { fg = "#414868", bg = "#414868" }  # Blue on Darkened black
+
+
+# Progress
+progress_label  = { fg = "#a9b1d6", bold = true }  # White
+progress_normal = { fg = "#7aa2f7", bg = "#414868" }  # Blue on Darkened black
+progress_error  = { fg = "#f7768e", bg = "#414868" }  # Red on Darkened black
+
+# Permissions
+perm_sep   = { fg = "#7aa2f7" }  # Blue
+perm_type  = { fg = "#9ece6a" }  # Green
+perm_read  = { fg = "#e0af68" }  # Yellow
+perm_write = { fg = "#f7768e" }  # Red
+perm_exec  = { fg = "#bb9af7" }  # Magenta
+
+
+# : }}}
+
+# : Pick {{{
+
+[pick]
+border = { fg = "#7aa2f7" }  # Blue
+active = { fg = "#bb9af7", bold = true }  # Magenta
+inactive = {}
+
+# : }}}
+
+
+# : Input {{{
+
+[input]
+border   = { fg = "#7aa2f7" }  # Blue
+title    = {}
+value    = {}
+selected = { reversed = true }
+
+# : }}}
+
+
+# : Completion {{{
+
+[completion]
+border = { fg = "#7aa2f7" }  # Blue
+
+# : }}}
+
+
+# : Tasks {{{
+
+[tasks]
+border  = { fg = "#7aa2f7" }  # Blue
+title   = {}
+hovered = { fg = "#bb9af7", underline = true }  # Magenta
+
+# : }}}
+
+
+# : Which {{{
+
+[which]
+mask            = { bg = "#414868" }  # Darkened black
+cand            = { fg = "#9ece6a" }  # Green
+rest            = { fg = "#a9b1d6" }  # White
+desc            = { fg = "#bb9af7" }  # Magenta
+separator       = "  "
+separator_style = { fg = "#626880" }  # Darkened gray
+
+# : }}}
+
+
+# : Help {{{
+
+[help]
+on      = { fg = "#9ece6a" }  # Green
+run     = { fg = "#bb9af7" }  # Magenta
+hovered = { reversed = true, bold = true }
+footer  = { fg = "#a9b1d6", bg = "#c6d0f5" }  # White on Light gray
+
+# : }}}
+
+
+# : Notify {{{
+
+[notify]
+title_info  = { fg = "#9ece6a" }  # Green
+title_warn  = { fg = "#f7768e" }  # Red
+title_error = { fg = "#e0af68" }  # Yellow
+
+# : }}}
+
+
+# : File-specific styles {{{
+
+[filetype]
+
+rules = [
+	# Images
+	{ mime = "image/*", fg = "#e0af68" },  # Yellow
+
+	# Media
+	{ mime = "video/*", fg = "#f7768e" },  # Red
+	{ mime = "audio/*", fg = "#f7768e" },  # Red
+
+	# Archives
+	{ mime = "application/zip",             fg = "#bb9af7" },  # Magenta
+	{ mime = "application/x-tar",           fg = "#bb9af7" },  # Magenta
+	{ mime = "application/x-bzip*",         fg = "#bb9af7" },  # Magenta
+	{ mime = "application/x-bzip2",         fg = "#bb9af7" },  # Magenta
+	{ mime = "application/x-7z-compressed", fg = "#bb9af7" },  # Magenta
+	{ mime = "application/x-rar",           fg = "#bb9af7" },  # Magenta
+	{ mime = "application/x-xz",            fg = "#bb9af7" },  # Magenta
+
+	# Documents
+	{ mime = "application/doc",   fg = "#9ece6a" },  # Green
+	{ mime = "application/pdf",   fg = "#9ece6a" },  # Green
+	{ mime = "application/rtf",   fg = "#9ece6a" },  # Green
+	{ mime = "application/vnd.*", fg = "#9ece6a" },  # Green
+
+	# Fallback
+	{ name = "*", fg = "#c6d0f5" },  # Light gray
+	{ name = "*/", fg = "#7aa2f7" }  # Blue
+]
+
+# : }}}

.config/yazi/yazi.toml

@@ -0,0 +1,31 @@
+[manager]
+ratio = [1, 4, 3]
+#show_hidden = true
+show_symlink = true
+
+[opener]
+play = [
+	{ run = 'mpv "$@"', orphan = true, for = "unix" },
+	#{ run = '"C:\Program Files\mpv.exe" %*', orphan = true, for = "windows" }
+]
+edit = [
+	{ run = '$EDITOR "$@"', block = true, for = "unix" },
+	#{ run = "%EDITOR% %*",  block = true, for = "windows" },
+]
+open = [
+	{ run = 'xdg-open "$@"', desc = "Open" },
+]
+sioyek = [
+    { run = 'sioyek "$@"', orphan = true, for = "unix" },
+]
+
+[open]
+prepend_rules = [
+	{ name = "*.pdf", use = "sioyek" },
+
+	# Multiple openers for a single rule
+	#{ name = "*.html", use = [ "open", "edit" ] },
+]
+#append_rules = [
+#	{ name = "*", use = "my-fallback" },
+#]

.gnupg/gpg-agent.conf

@@ -6,7 +6,7 @@
 #pinentry-program /usr/local/bin/pinentry-curses
 #pinentry-program /usr/local/bin/pinentry-mac
 #pinentry-program /opt/homebrew/bin/pinentry-mac
-pinentry-program /usr/bin/pinentry-curses
+pinentry-program /usr/sbin/pinentry-curses
 enable-ssh-support
 ttyname $GPG_TTY
 default-cache-ttl 60

.zshrc

@@ -96,6 +96,7 @@ zstyle ":completion:*" list-colors "${(s.:.)LS_COLORS}"
 # PATH
 # Local PATH
 export PATH=$PATH:$HOME/.local/bin
+export PATH=$PATH:$HOME/.local/share/bumblebee-status
 
 # Mason PATH
 export PATH=$PATH:$HOME/.local/share/nvim/mason/bin
@@ -105,7 +106,7 @@ export PATH=$PATH:/sbin
 export PATH=$PATH:/usr/sbin
 
 # Rust
-export PATH=$PATH:/usr/local/share/cargo/bin
+export PATH=$PATH:/usr/share/cargo/bin
 
 # Android
 export PATH=$PATH:/usr/share/android-tools
@@ -114,10 +115,10 @@ export PATH=$PATH:/usr/share/android-tools
 export PATH=$PATH:/opt/rocm/bin
 
 # Java
-#export PATH=$PATH:/usr/local/jdk-21/bin
+#export PATH=$PATH:/usr/jdk-21/bin
 
 # Ltex-LS
-#export PATH=$PATH:/usr/local/share/ltex-ls-16.0.0/bin
+#export PATH=$PATH:/usr/share/ltex-ls-16.0.0/bin
 
 # pyenv
 export PYENV_ROOT=/usr/share/pyenv
@@ -136,7 +137,8 @@ export HSA_OVERRIDE_GFX_VERSION="10.3.0"
 export BAT_THEME="tokyonight_night"
 
 # Rust
-export CARGO_HOME="/usr/local/share/cargo"
+export CARGO_HOME="/usr/share/cargo"
+export RUSTUP_HOME="/usr/share/rustup"
 
 # ssh and gpg
 export GPG_TTY=$(tty)
@@ -180,34 +182,40 @@ _fzf_comprun() {
 }
 
 # ALIAS
-# convinience
+# btop
-alias doas="sudo"
+alias top="btop"
+
+# cat
+alias cat="bat"
+
+# cd
+alias cd="z"
+
+# ls
+alias ls="eza --color=always --long --git --icons=always --group"
+
+# mutt
+#alias mutt='neomutt'
 
 # Neovim
 alias vi="nvim"
 alias vim="nvim"
 
-# cat
+# mpd/mpc
-alias cat="bat"
+alias mpc="mpc --host='$HOME/.config/mpd/socket'"
-
-# ls
-alias ls="eza --color=always --long --git --icons=always --group"
-
-# cd
-alias cd="z"
-
-# mutt
-#alias mutt='neomutt'
 
 # rsync
 alias rsync="rsync -h -v -r -P -p -t --stats"
 
+# sudo to doas
+alias doas="sudo"
+
+# vimpc
+alias vimpc="vimpc -h '$HOME/.config/mpd/socket'"
+
 # wget folder
 alias wget_f="wget -r -np -R 'index.html*'"
 
-# btop
-alias top="btop"
-
 # Shell integrations
 # The fuck
 eval $(thefuck --alias)